2022 Subaru WRX
Mileage
65,660
Service Date
12/18/2025
Services Performed
- MIL is off. Code Scan: -Antilock Brakes P2200
- Refer to OEM repair information for code description P2400
- Refer to OEM repair information for code description -Airbag B1797
- Occupant Detection Sensor Supplier ID And Function ID Mismatch – – History Fault. -Body Integration Unit P1300
- Refer to OEM repair information for code description P1400
- Refer to OEM repair information for code description -Central Gateway U1198
- Lost Communication With Telematics System – – History Fault. Cockpit Control B2258
- Meter Signal Input – – Current Fault, History Fault. B2259
- Center Information Display Communication Open – – History Fault. B2256
- Data Communication Module Communication Open – – History Fault. -Combination Meter B1509
- Flash To Pass Switch Circuit Short To Battery – – History Fault. Front Relay Control Module B1A01
- Front Relay Control Module Battery (Control) Power Supply – – History Fault. B1A02
- Front Relay Control Module Battery (Back Up) Power Supply – – History Fault. B1A03
- Front Relay Control Module Ignition Power Supply – – History Fault. -Keyless Access with Push Button Start (Collation) U1198
- Lost Communication With Telematics System – – History Fault. B2793
- Backup Power – – History Fault. -Keyless Access with Push Button Start (Power Supply) U1198
- Lost Communication With Telematics System – – History Fault. -Power Window – Driver B2B01
- Driver's Door Power Window Manual Up Switch Stuck – – History Fault. -Tire Pressure Monitor C2021
- Tire 1 Air Pressure Decrease Normal Mode – – History Fault. C2022
- Tire 2 Air Pressure Decrease Normal Mode – – History Fault. C2023
- Tire 3 Air Pressure Decrease Normal Mode – – History Fault. C2024
- Tire 4 Air Pressure Decrease Normal Mode – – History Fault. -OBDII Permanent Codes ($0A) P0016
- Crankshaft Position – Camshaft Position Correlation Bank 1 Sensor A Incomplete Monitors: Fuel System EGR/VVT Catalyst Evaporative System Oxygen Sensor No current engine codes, just the P0016 in permanent code list. Looks like someone just cleared faults. Pulled up the VVT data on scan tool to check the Initial Position Learned Values for all four cams. Learned values are like base mechanical valve timing positions. Spec is 71-89 degrees for intakes, and 110-119 degrees for exhaust B1 In=0 B2 In=80.5 B1 Ex=109.5 B2 Ex=108.8 B1 Intake had not learned for some reason. Checked the systems ability to perform adjustments and found all four cams to adjust when VVT is commanded. Performed a learned position reset procedure, then road tested to learn new values. Confirm all did learn: B1 In=78.5 B2 In=80.3 B1 Ex=109.5 B2 Ex=108.6 Engine oil is full and clean. Need to road test for a while now to see if a fault returns and if the learned value changes. Cleared ALL system faults as well.
Alex N. gave our service a 5 star review on 12/20/2025
