- Fault code scan only found problem in engine control system. P2103 throttle actuator control motor circuit high. Currently no lights are on and vehicle runs normally. This code usually sets due to Sticky throttle body. If throttle blade sticks and causes high amperage draw on control circuit the fault will set. Found throttle body very dirty. Clean throttle body and mass air flow sensor and reset system. Road test multiple times with no Faults. Advised to return vehicle to customer. If problem returns will need replacement throttle body.
- Remove four wheels and rear brake drums/rotors to inspect brake condition. Inspect entire system for leaks. – Recommend tire rotation – Rear brakes approximately 50% remaining – recommend clean and adjust – Front brakes approximately 40% remaining
- Service and adjust rear brakes
- Change oil & filter. Top off all fluid levels. Check & adjust tire pressure. Visual inspection of hoses, belts, etc. Lube chassis.
Dale C. gave our service a 5 star review on 9/28/2021