2010 Honda Accord
Mileage
130,531
Service Date
8/27/2021
Services Performed
- Road test vehicle, check engine light, tire light and oil light came on. Diagnose code P2651 Oil pressure switch B fault. Found oil 3 qts. low. Timing chain rattle on start. Added oil, no more noise and VTEC works. All tires low and air light on. Added air and light is now off.
- VALVE CLEARANCE – ADJUST – [Adjust only if noisy.] ENGINE OIL – REPLACE – MAINTENANCE MINDER LIGHT – RESET
- VALVE CLEARANCE – ADJUST – MAINTENANCE MINDER LIGHT – RESET TIRES – ROTATE
- VALVE CLEARANCE – ADJUST – DRIVE BELTS – INSPECT – AIR CLEANER ELEMENT – REPLACE – CABIN AIR FILTER – REPLACE – MAINTENANCE MINDER LIGHT – RESET
- VALVE CLEARANCE – ADJUST – AUTOMATIC TRANSAXLE FLUID – REPLACE – MANUAL TRANSAXLE FLUID – REPLACE MAINTENANCE MINDER LIGHT – RESET –
- – LOF – Air filter dirty – Cabin filter dirty Transmission fluid dirty – Tire rotation – Spark plugs over gap – Headlight restoration – Rack and pinion small leak – Passenger side axle inside – small leak – Front brakes approximately 45% remaining – Rear brakes approximately 20% remaining – Left side stud
- Change oil & filter. Top off all fluid levels. Check & adjust tire pressure. Visual inspection of hoses, belts, etc. Lube chassis.
- Replace air filter
- Remove and replace cabin filter
- Drain and fill
- Remove and replace spark plugs
- Headlight restoration
- Install dealer pads.
- Machine rear rotors on vehicle
- Install dealer pads and replace rotors
- Machine front rotors on vehicle
- Rotate tires – no charge with brake job
- Remove and replace broken lug stud left front
Mitch B. gave our service a 5 star review on 8/28/2021
