Services Performed
- Failed at another shop for MIL on and misfire codes. Code Scan: Engine – Current Codes P0300
- Random / Multiple Cylinder Misfire Detected P0301
- Cylinder 1 Misfire Detected P0302
- Cylinder 2 Misfire Detected P0304
- Cylinder 4 Misfire Detected OBDII Permanent Codes ($0A) P0302
- Cylinder 2 Misfire Detected P0304
- Cylinder 4 Misfire Detected *All monitors are complete* When engine started the first time to pull into shop, there was a major misfire and engine rattle (rattle is a result of misfire only) that went away in about 5-7 seconds. Found coolant slightly low. Tested for Hydrocarbons in coolant tank, found about 600PPM. #2 cylinder has the majority of misfire counts. Remove wiper cowl to access coils/plugs. #2 plug has abnormal discoloration on resistor. With pressure on cooling system, used borescope to look into #2 cylinder and found coolant actively dripping from the head gasket down the cylinder wall. See picture. Engine needs the head gasket replaced and cylinder head checked at machine shop.
- Install Cat Security shield
- CYLINDER HEAD GASKET – Remove & Replace – [Includes: Disable and Enable High Voltage System. Includes: R&I Engine Assembly. DOES NOT include wheel alignment.] – [Includes: Remove carbon and check surfaces for warpage. Includes adjust Valves (where applica
- Clean prior to machining head. Surface head 3-4 cylinders and pressure test 4 cylinders.
- Hazardous Waste Disposal Fee
Lindsay C. gave our service a 5 star review on 6/21/2024
